Thursday, January 29, 2015

Best Oil Stocks To Invest In 2014

Total (NYSE: TOT  ) will release its quarterly report tomorrow, and investors have gotten a bit more upbeat about the prospects for the French oil company's stock. Yet from an income perspective, Total earnings aren't poised to deliver the growth that you'd expect in light of relatively strong price action in the oil market in recent months.

One thing that U.S. investors often forget is that the world energy markets are much different from what we've seen domestically in recent years. While the U.S. is awash in oil and natural gas, prices for crude oil and refined products remain relatively high overseas. Moreover, with the European economic crisis, Total has had to face a harsh investing environment. Let's take an early look at what's been happening with Total over the past quarter and what we're likely to see in its quarterly report.

Stats on Total

Analyst EPS Estimate

Top Airline Stocks To Watch For 2015: SandRidge Mississippian Trust I (SDT)

SandRidge Mississippian Trust I (The Trust) is a statutory trust. The Trust was created to acquire and hold the Royalty Interests for the benefit of Trust unitholders. SandRidge conveyed to the Trust the Royalty Interests in specified oil and natural gas properties in the Mississippian formation in Alfalfa, Garfield, Grant, Major and Woods counties in Oklahoma (the Underlying Properties). These Royalty Interests were derived from SandRidge�� interests in a 36 wells and the equivalent of 123 horizontal development wells to be drilled in the Mississippian formation (Trust Development Wells) within an area of mutual interest (AMI), consisting of approximately 49,600 gross acres (42,000 net acres) in the counties where the Underlying Properties are located.

Effective January 1, 2011, the Royalty Interests entitle the Trust to receive 90% of the proceeds from the sale of oil and natural gas production attributable to its net revenue interest in the Initial Wells and 50% of the proceeds from the sale of oil and natural gas production attributable to SandRidge�� net revenue interest in the Trust Development Wells. As of December 31, 2011, the Trust�� properties consisted of Royalty Interests in the Initial Wells, 48 wells (equivalent to approximately 53 Trust Development Wells under the development agreement) and the equivalent of approximately 70 Trust Development Wells to be drilled in the Mississippian formation.

Advisors' Opinion:
  • [By Matt DiLallo]

    The problem here is that SandRidge has been�dependent�on asset sales and its running out of assets to sell. In addition to the Permian sale, SandRidge has now taken three royalty trusts public. One consisting of Permian Basin assets, SandRidge Permian Trust (NYSE: PER  ) and two consisting of Mississippian assets, SandRidge Mississippian Trust I (NYSE: SDT  ) and SandRidge Mississippian Trust II (NYSE: SDR  ) . While SandRidge still owns a portion of each trust, it likely will continue to sell off its ownership stake in each trust as well as other assets it still owns. At some point SandRidge will need to live within its oil and gas cash flows, otherwise, its not worth owning.�

  • [By Adam Galas]

    As the chart illustrates, SandRidge's other royalty trust,�SandRidge Mississippian Trust I (NYSE: SDT  ) , which has already had its final wells drilled, has been experiencing a severe decline in distributions, a result of its massive quarterly production declines of 26%, 21%, and 22% immediately after the last well was drilled.�

  • [By Dan Caplinger]

    SandRidge has made a huge bet on the Mississippian Lime shale play, especially after selling off its Permian Basin assets late last year. Unfortunately, that bet hasn't paid off well for shareholders, as the company saw its spun-off royalty trusts SandRidge Mississippian Trust I (NYSE: SDT  ) and SandRidge Mississippian Trust II (NYSE: SDR  ) fail to meet their projections for distribution amounts during the first quarter. The main problem has been that wells in the Mississippian Lime have produced more natural gas than expected, and even with a slight rebound in gas prices, it still doesn't produce adequate margins compared to oil and natural-gas liquids.

  • [By Matt DiLallo]

    SandRidge Mississippian Trust I (NYSE: SDT  ) and Trust II (NYSE: SDR  )
    These trusts were created by SandRidge Energy (NYSE: SD  ) , with the first Mississippian Trust formed in 2010 and the second formed one year later. Both trusts own royalty interests in oil and gas properties targeting the Mississippian formation and have future upside as SandRidge drills wells as part of the areas of mutual interest.

Best Oil Stocks To Invest In 2014: RPC Inc (RES)

RPC, Inc. (RPC), incorporated on January 20, 1984, is a holding company. The Company provides a broad range of specialized oilfield services and equipment primarily to independent and oil and gas companies engaged in the exploration, production and development of oil and gas properties throughout the United States, including the southwest, mid-continent, Gulf of Mexico, Rocky Mountain and Appalachian regions, and in selected international markets. The Company operates in two business segments: Technical Services and Support Services.

The services and equipment provided include, among others, pressure pumping services,downhole tool services coiled tubing services, snubbing services (also referred to as hydraulic workover services), nitrogen services, the rental of drill pipe and other specialized oilfield equipment, and well control. RPC acts as a holding company for its operating units, Cudd Energy Services, Patterson Rental and Fishing Tools, Bronco Oilfield Services, Thru Tubing Solutions, Well Control School, and others.

Technical Services

Technical Services include RPC�� oil and gas service lines that utilize people and equipment to perform value-added completion, production and maintenance services directly to a customer�� well. The demand for these services is generally influenced by customers��decisions to invest capital toward initiating production in a new oil or natural gas well, improving production flows in an existing formation, or to address well control issues. This business segment consists primarily of pressure pumping, downhole tools, coiled tubing, snubbing, nitrogen, well control, wireline and fishing. The principal markets for this business segment include the United States, including the southwest, mid-continent, Gulf of Mexico, Rocky Mountain and Appalachian regions, and in selected international markets. Customers include multi-national and independent oil and gas producers, and selected nationally owned oil companies.

The Company primarily provides these services to customers in order to enhance the initial production of hydrocarbons in formations that have low permeability. Pressure pumping services involve using complex, truck or skid-mounted equipment designed and constructed for each specific pumping service offered. The mobility of this equipment permits pressure pumping services to be performed in varying geographic areas. Principal materials utilized in the pressure pumping business include fracturing proppants, acid and bulk chemical additives. Generally, these items are available from several suppliers, and the Company utilizes more than one supplier for each item.

Fracturing services are performed to stimulate production of oil and natural gas by increasing the permeability of a formation. Fracturing is particularly important in shale formations, which have low permeability, and unconventional completion, because the formation containing hydrocarbons is not concentrated in one area and requires multiple fracturing operations. The fracturing process consists of pumping fluid gel and sometimes nitrogen into a cased well at sufficient pressure to fracture the formation at desired locations and depths. Sand, bauxite or synthetic proppant, which is often suspended in gel, is pumped into the fracture. When the pressure is released at the surface, the fluid gel returns to the well surface, but the proppant remains in the fracture, thus keeping it open so that oil and natural gas can flow through the fracture into the production tubing and ultimately the well surface.

Acidizing services are also performed to stimulate production of oil and natural gas, but they are used in wells that have undergone formation damage due to the buildup of various materials that block the formation. Acidizing entails pumping volumes of specially formulated acids into reservoirs to dissolve barriers and enlarge crevices in the formation, thereby eliminating obstacles to the flow of oil and natural gas.! Acidizin! g services can also enhance production in limestone formations.Throug. TTS provides services and downhole motors, fishing tools and other specialized downhole tools and processes to operators and service companies in drilling and production operations, including casing perforation at the completion stage of an oil or gas well. The services that TTS provides are especially suited for unconventional drilling and completion activities.

Coiled tubing services, involve the injection of coiled tubing into wells to perform various applications and functions for use principally in well-servicing operations and more recently to facilitate completion of horizontal wells. Coiled tubing is a flexible steel pipe with a diameter of less than four inches manufactured in continuous lengths of thousands of feet and wound or coiled around a reel. It can be inserted through existing production tubing and used to perform workovers without using a larger, more costly workover rig. Principal advantages of employing coiled tubing in a workover operation include: not having to shut-in the well during such operations, the ability to reel continuous coiled tubing in and out of a well significantly faster than conventional pipe, the ability to direct fluids into a wellbore with more precision, and enhanced access to remote or offshore fields due to the smaller size and mobility of a coiled tubing unit compared to a workover rig.

Snubbing involves using a hydraulic workover rig that permits an operator to repair damaged casing, production tubing and downhole production equipment in a high-pressure environment. A snubbing unit makes it possible to remove and replace downhole equipment while maintaining pressure on the well. Customers benefit because these operations can be performed without removing the pressure from the well, which stops production and can damage the formation, and because a snubbing rig can perform many applications at a lower cost than other alternatives. There are a number of uses fo! r nitroge! n, an inert, non-combustible element, in providing services to oilfield customers and industrial users outside of the oilfield. For its oilfield customers, nitrogen can be used to clean drilling and production pipe and displace fluids in various drilling applications.

For its oilfield customers, nitrogen can be used to clean drilling and production pipe and displace fluids in various drilling applications. Increasingly, it is used as a displacement medium to production in older wells in which production has depleted. It also can be used to create a fire-retardant environment in hazardous blowout situations and as a fracturing medium for its fracturing service line. In addition, nitrogen can be complementary to its snubbing and coiled tubing service lines, because it is a non-corrosive medium and is frequently injected into a well using coiled tubing. For non-oilfield industrial users, nitrogen can be used to purge pipelines and create a non-combustible environment.

Cudd Energy Services specializes in responding to and controlling oil and gas well emergencies, including blowouts and well fires, domestically and internationally. In connection with these services, Cudd Energy Services, along with Patterson Services, has the capacity to supply the equipment, and personnel necessary to restore affected oil and gas wells to production. During the past several years, the Company has responded to well control situations in several international locations including Algeria, Argentina, Australia, Bolivia, Canada, Colombia, Egypt, Kuwait, Libya, Mexico, Qatar, Taiwan, Trinidad, Turkmenistan, Tanzania, Abu Dhabi and Venezuela.

Wireline is classified into two types of services: slick or braided line and electric line. In both, a spooled wire is unwound and lowered into a well, conveying various types of tools or equipment. Slick or braided line services use a non-conductive line primarily for jarring objects into or out of a well, as in fishing or plug-setting operations. Elect! ric line ! services lower an electrical conductor line into a well allowing the use of electrically-operated tools such as perforators, bridge plugs and logging tools. Wireline services can be an integral part of the plug and abandonment process, near the end of the life cycle of a well.

Fishing involves the use of specialized tools and procedures to retrieve lost equipment from a well drilling operation and producing wells. It is a service required by oil and gas operators who have lost equipment in a well. Oil and natural gas production from an affected well typically declines until the lost equipment can be retrieved. In some cases, the Company creates customized tools to perform a fishing operation. The customized tools are maintained by the Company after the particular fishing job for future use if a similar need arises.

Support Services

Support Services include RPC�� oil and gas service lines that primarily provide equipment for customer use or services to assist customer operations. The equipment and services include drill pipe and related tools, pipe handling, pipe inspection and storage services, and oilfield training services. The demand for these services tends to be influenced primarily by customer drilling-related activity levels. The principal markets for this segment include the United States, including the Gulf of Mexico, mid-continent, Rocky Mountain and Appalachian regions and project work in selected international locations in the last three years including primarily Canada, Latin America and the Middle East. Customers primarily include domestic operations of multi-national and independent oil and gas producers, and selected nationally owned oil companies.

Rental tools accounted for approximately 5% of 2012 revenues. The Company rents specialized equipment for use with onshore and offshore oil and gas well drilling, completion and workover activities. The drilling and subsequent operation of oil and gas wells generally require ! a variety! of equipment. The equipment needed is in part determined by the geological features of the production zone and the size of the well itself. As a result, operators and drilling contractors often find it more economical to supplement their tool and tubular inventories with rental items instead of owning a complete inventory. The Company�� facilities are strategically located to serve the staging points for oil and gas activities in the Gulf of Mexico, mid-continent region, Appalachian region and the Rocky Mountains.

Oilfield Pipe Inspection Services, Pipe Management and Pipe Storage includes pipe inspection services include Full Body Electromagnetic and Phased Array Ultrasonic inspection of pipe used in oil and gas wells. These services are provided at both the Company�� inspection facilities and at independent tubular mills in accordance with negotiated sales and/or service contracts. Its customers are oil companies and steel mills, for which it provides in-house inspection services, inventory management and process control of tubing, casing and drill pipe. Its locations in Channelview, Texas and Morgan City, Louisiana are equipped with capacity cranes, specially designed forklifts and a computerized inventory system to serve a variety of storage and handling services for both oilfield and non-oilfield customers.

Well Control School provides industry and government accredited training for the oil and gas industry both in the United States and in limited international locations. Well Control School provides training in various formats including conventional classroom training, interactive computer training including training delivered over the Internet, and mobile simulator training. Energy Personnel International provides drilling and production engineers, well site supervisors, project management specialists, and workover and completion specialists on a consulting basis to the oil and gas industry to meet customers��needs for staff engineering and well site management.

!

The Company competes with Halliburton Energy Services Group, , Baker Hughes and Schlumberger Ltd.

Advisors' Opinion:
  • [By Tim Brugger]

    For the third straight quarter, the board of directors of Atlanta-based oilfield equipment and services supplier RPC (NYSE: RES  ) has declared a $0.10-per-share dividend, the company announced today.

  • [By Dimitra DeFotis]

    The market seems to be showing fatigue particularly with positive onshore oil service data points that may no�longer seem incremental. Investors have become especially focused on potential issues and macro concerns. We believe this phase�of enhanced risk perceptions will pass and still recommend owning selective stocks based on attractive valuations and healthy�fundamentals. Of the 16 oilfield services companies having reported their quarters to date, the share price changes have at times�been difficult to tie to specific results. �… Five of the 12 companies who have beaten earnings expectations have seen their share prices drop on the day, including Basic Energy Services (BAS) (-9.0%), Baker Hughes (BHI) (-2.5%), National Oilwell Varco (NOV) (-1.5%), Oceaneering (OII) (-4.2%), and Schlumberger (SLB) (-2.0%). Other stocks beating expectations have traded higher as expected, including Cameron International (CAM) (+4.1%), FMC Technologies (FTI) (+3.1%), Mitcham Industries (MIND) (+3.8%), Nabors Industries (NBR) (+1.2%), Patterson-UTI Energy (PTEN) (+1.8%), RPC (RES) (+8.4%), and Weatherford International (WFT) (+2.3%). Companies which have missed have universally seen their share prices decline, including Diamond Offshore Drilling (DO) (-4.3%), Gulfmark Offshore (GLF) (-0.1%), and Hercules Offshore (HERO) (-6.9%). Halliburton (HAL) was in line and flat on the day.

  • [By Travis Hoium]

    What: Shares of oilfield service company RPC (NYSE: RES  ) lost 12% of their value today after the company reported earnings.

    So what: Revenue dropped 15% in the first quarter to $425.8 million, well below the $470.1 million estimate. Net income dropped 57% to $35.1 million, or $0.16 per share, and analysts expected a $0.25-per-share profit. �

  • [By Arie Goren]

    After running this screen on May 21, 2013, before the markets' open, I discovered the following eight stocks: Sunoco Logistics Partners LP (SXL), Leggett & Platt Inc (LEG), Copa Holdings SA (CPA), RPC Inc. (RES), Tupperware Brands Corp. (TUP), Herbalife Ltd. (HLF), John Wiley & Sons Inc. (JW.A) and C.H. Robinson Worldwide Inc. (CHRW).

Best Oil Stocks To Invest In 2014: Western Gas Equity Partners LP (WGP)

Western Gas Equity Partners, LP, incorporated on September 11, 2007, was formed to own three types of partnership interests in Western Gas Partners, LP (WES). WES is a limited partnership formed by Anadarko Petroleum Corporation to own, operate, acquire and develop midstream energy assets. As of December 31, 2011, the Company had no independent operations. On January 13, 2012, WES acquired 100% interest of Mountain Gas Resources LLC (MGR). On August 1, 2012, WES acquired 24% interest of Chipeta Processing LLC (Chipeta).

WES is engaged in the business of gathering, processing, compressing, treating and transporting natural gas, condensate, natural gas liquids (NGLs) and crude oil for Anadarko, as well as third-party producers and customers. The assets of WGP, through its partnership interests in WES, include thirteen gathering systems, seven natural gas treating facilities, ten natural gas processing facilities, two NGL pipelines, one interstate gas pipeline, one intrastate gas pipeline, and three separate interests in Fort Union, White Cliffs Pipeline, LLC (White Cliffs) and Rendezvous Gas Services, LLC (Rendezvous). These assets are located in East and West Texas, the Rocky Mountains (Colorado, Utah and Wyoming), and the Mid-Continent (Kansas and Oklahoma). WES also has facilities under construction in South Texas and northeast Colorado. During the year ended December 31, 2011, WES completed the construction of a cryogenic processing train at its Chipeta facility , which had a designed capacity of approximately 300 million cubic feet of natural gas per day and was placed into service in October 2012.

Advisors' Opinion:
  • [By Jonas Elmerraji]

    The exact same setup is potentially giving traders a reason to jump into shares of $8.5 billion midstream gas company Western Gas Equity Partners (WGP). Just like Flotek, WGP is forming a textbook channel up. And this week, Western Gas is testing trendline support.

    It's a little too early to call WGP's trendline buyable here. At some point, all trends eventually fail -- and when this one does, you don't want to be left holding the bag. A bounce this week will be a good indication that WGP can still catch a bid at this price level. When and if that happens, I'd recommend keeping a tight protective stop in place just below WGP's most recent swing low at $38.

    While the 50-day moving average has been crossing paths with WGP quite a bit in the last month, I'd recommend ignoring it. The average hasn't acted as a meaningful support or resistance level to date. In the case of this particular name, it's just not technically relevant.

Best Oil Stocks To Invest In 2014: San Juan Basin Royalty Trust (SJT)

San Juan Basin Royalty Trust (the Trust) is an express trust created by the San Juan Basin Royalty Trust Indenture, between Southland Royalty Company (Southland Royalty) and The Fort Worth National Bank. The Trustee of the Trust is Compass Bank. The function of the Trustee is to collect the net proceeds attributable to the Royalty (Royalty Income), to pay all expenses and charges of the Trust and distribute the remaining available income to the Unit Holders. The Royalty conveyed to the Trust was carved out of Burlington Resources Oil & Gas Company LP�� (Burlington) working interests and royalty interests in certain properties situated in the San Juan Basin in northwestern New Mexico.

Burlington is the principal operator of the Underlying Properties. A percentage of the Royalty Income is attributable to the production and sale by Burlington of natural gas from the Underlying Properties. The Underlying Properties are primarily gas producing properties. The Underlying Properties consist of working interests, royalty interests, overriding royalty interests and other contractual rights in 151,900 gross (119,000 net) producing acres in San Juan, Rio Arriba and Sandoval Counties of northwestern New Mexico and 4,015 gross (1,158.5 net) wells. Gas produced in the San Juan Basin is sold in both interstate and intrastate commerce. Gas production from the properties totaled 32,580,756 million cubic feet (Mcf), during the year ended December 31, 2012. Gas produced from the Underlying Properties is processed at one of the five plants: Chaco, Val Verde, Milagro, Ignacio, and Kutz, all located in the San Juan Basin. Gas produced from the Underlying Properties and processed at Kutz is being sold under three separate contracts with Pacific Gas and Electric Company (PG&E), Shell Energy North America (US), LP (Shell) and New Mexico Gas Company, Inc. (NMGC).

Advisors' Opinion:
  • [By Aaron Levitt]

    San Juan Basin Royalty Trust (SJT): Rising natural gas prices have been a boon to SJT as the royalty trust owns natural gas wells located in New Mexico. Units of trust are up around 30% this year on the back of these higher prices. Also up are SJT�� distributions. The royalty trust paid out 4 cents per share per month last year. This May, SJT paid 10 cents- a nice 150% gain in dividends. SJT currently yields over 6% based on the last 12 months of monthly dividend payments.

  • [By Rich Duprey]

    San Juan Basin Royalty Trust (NYSE: SJT  ) announced yesterday its July monthly distribution of $0.080643�per unit, based principally upon production during the month of April.

Best Oil Stocks To Invest In 2014: CVR Energy Inc (CVI)

CVR Energy, Inc. (CVR Energy), incorporated September 2006, through its wholly owned subsidiaries, acts as an independent petroleum refiner and marketer of transportation fuels in the mid-continental United States. In addition, the Company, through its majority-owned subsidiaries, acts as an independent producer and marketer of nitrogen fertilizer products in North America. As of December 31, 2011, the Company owned the general partner and approximately 70% of CVR Partners, LP (the Partnership), a limited partnership which produces nitrogen fertilizers in the form of ammonia and an aqueous solution of urea and ammonium nitrate used as a fertilizer (UAN). The Company operates in two segments: the petroleum segment and the nitrogen fertilizer segment. On December 15, 2011, the Company acquired Gary-Williams Energy Corporation and its subsidiaries (GWEC).

Petroleum Business

The Company operates a 115,000 barrels per day complex full coking medium-sour crude oil refinery in Coffeyville, Kansas and, as of December 15, 2011, a 70,000 barrels per day crude oil unit refinery in Wynnewood, Oklahoma. Its combined production capacity represents approximately 15% of its region's output during the year ended December 31, 2011. The Coffeyville facility is situated on approximately 440 acres in southeast Kansas, approximately 100 miles from Cushing, Oklahoma, a crude oil trading and storage hub. The Wynnewood facility is situated on approximately 400 acres located approximately 65 miles south of Oklahoma City, Oklahoma and approximately 130 miles from Cushing, Oklahoma. During 2011, its Coffeyville refinery's product yield included gasoline (mainly regular unleaded) (44%), diesel fuel (42%), and pet coke and other refined products, such as natural gas liquids (NGL) (propane and butane), slurry, sulfur and gas oil (14%). Its Wynnewood refinery's product yield included gasoline (54%), diesel fuel (31%), asphalt (6%), jet fuel (3%) and other products (6%) during 2011.

The Company! owns and operates a crude oil gathering system serving Kansas, Oklahoma, western Missouri and southwestern Nebraska. The system has field offices in Bartlesville, Oklahoma, Plainville, Kansas and Winfield, Kansas. The system consists of approximately 350 miles of feeder and trunk pipelines, 100 trucks, and associated storage facilities for gathering sweet crude oils purchased from independent crude oil producers in Kansas, Nebraska, Oklahoma and Missouri. It also leases a section of a pipeline from Magellan Midstream Partners, L.P. (Magellan), which is incorporated into its crude oil gathering system. During 2011, the Company�� crude oil gathering system had a gathering capacity of approximately 38,000 barrels per day. During 2011, it gathered an average of approximately 35,000 barrels per day.

CVR Energy owns a pipeline system capable of transporting approximately 145,000 barrels per day of crude oil from Caney, Kansas to its refinery. Crude oils sourced outside of its gathering system are delivered by common carrier pipelines into various terminals in Cushing, Oklahoma, where they are blended and then delivered to Caney, Kansas via a pipeline owned by Plains Pipeline L.P. (Plains). The Company also owns associated crude oil storage tanks with a capacity of approximately 1.2 million barrels located outside its Coffeyville refinery, 0.5 million barrels of crude oil storage at Wynnewood, Oklahoma, and lease an additional 3.3 million barrels of storage capacity located at Cushing, Oklahoma and other locations. In addition to crude oil storage, it owns approximately 4.5 million barrels of combined refinery related storage capacity.

CVR Energy has access to foreign crude oil from Latin America, South America, West Africa, the Middle East, the North Sea and Canada. It purchases domestic crude oil from Kansas, Oklahoma, Nebraska, Texas, North Dakota, Missouri, and offshore deepwater Gulf of Mexico production. During 2011, its Coffeyville crude oil supply blend consisted of approx! imately 8! 0% light sweet crude oil, 2% light/medium sour crude oil and 18% heavy sour crude oil. During 2011, Wynnewood's crude oil supply blend consisted of approximately 88% sweet crude oil and 12% light/medium sour crude oil.

During 2011, approximately 35% of the Coffeyville refinery's products were sold through the rack system directly to retail and wholesale customers, while the remaining 65% was sold through pipelines via bulk spot and term contracts. The Company makes bulk sales (sales into third party pipelines) into the mid-continent markets via Magellan and into Colorado and other destinations utilizing the product pipeline networks owned by Magellan, Enterprise Products Operating, L.P. (Enterprise) and NuStar Energy, LP (NuStar). Approximately 60% of the Wynnewood refinery's finished products sold are distributed in Oklahoma. Customers for its petroleum products include other refiners, convenience store companies, railroads and farm cooperatives.

The Company competes with BP, Conoco Phillips, HollyFrontier, NCRA, Valero, Flint Hills Resources, CHS and Shell.

Nitrogen Fertilizer Business

The nitrogen fertilizer business, operated by the Partnership, is the nitrogen fertilizer plant in North America. It utilizes a pet coke gasification process to produce nitrogen fertilizer. The nitrogen fertilizer facility's primary input is pet coke. The nitrogen fertilizer facility includes a 1,225 ton-per-day ammonia unit, a 2,025 ton-per-day UAN unit and a gasifier complex having a capacity of 84 million standard cubic feet per day. Linde LLC (Linde) owns, operates, and maintains the air separation plant that provides contract volumes of oxygen, nitrogen and compressed dry air to the gasifier for a monthly fee.

The primary geographic markets for the nitrogen fertilizer business' fertilizer products are Kansas, Missouri, Nebraska, Iowa, Illinois, Colorado and Texas. The nitrogen fertilizer business markets the ammonia products to industrial and agricu! ltural cu! stomers and the UAN products to agricultural customers. The nitrogen fertilizer business sells ammonia to agricultural and industrial customers. Agricultural customers include distributors such as MFA, United Suppliers, Inc., Brandt Consolidated Inc., Gavilon Fertilizer LLC, Transammonia, Inc., Agri Services of Brunswick, LLC, Interchem and CHS Inc. Industrial customers include Tessenderlo Kerley, Inc., National Cooperative Refinery Association, and Dyno Nobel, Inc. The nitrogen fertilizer business sells UAN products to retailers and distributors.

The Company competes with Agrium, Koch Nitrogen, Potash Corporation and CF Industries.

Advisors' Opinion:
  • [By Robert Rapier]

    CVR Partners’ fertilizer plant is located in Coffeyville, Kansas, adjacent to the refinery owned by CVR Refining (NYSE: CVRR). CVR Energy (NYSE: CVI), majority-owned by Carl Icahn via Icahn Enterprises (NYSE: IEP), is the general partner and owns most of the units for both CVR Partners and CVR Refining.

  • [By Igor Greenwald]

    He paid $30 a share for refiner and fertilizer maker CVR Energy (CVI) and that stock has appreciated 43% in 18 months, earning Icahn a total return of $2.9 billion through June.

Best Oil Stocks To Invest In 2014: Dresser-Rand Group Inc (DRC)

Dresser-Rand Group Inc., incorporated on October 1,2004, is a global supplier of of custom-engineered rotating equipment solutions for long-life, critical applications in the oil, gas, chemical, petrochemical, process, power generation, military and other industries worldwide. Its rotating equipment is also supplied to the environmental solutions market space within energy infrastructure. It designs, manufactures and markets engineered rotating equipment and provide services to the worldwide oil, gas, petrochemical, power generation, environmental solutions and industrial process industries. In July 2012, the Company acquired compressed air energy storage property.

The Company has two segments: new units and aftermarket parts. New units are predominately engineered solutions to new requests from clients. New units also include standardized equipment such as engines and single stage steam turbines. The segment includes engineering, manufacturing, packaging, testing, sales and administrative support. Aftermarket parts and services consist of support solutions for the existing population of installed equipment and the operation and maintenance of several types of energy plants. The segment includes engineering, manufacturing, installation, commissioning, start-up and other field services, repairs, overhauls, refurbishment, sales and administrative support.

The Company's products and services are used in oil and gas applications that include hydrogen recycle, make-up, wet gas and other applications for the refining industry; cracked gas, propylene and ethylene compression for petrochemical facilities; ammonia syngas, refrigeration, and carbon dioxide compression for fertilizer production; a number of compression duties for chemical plants; gas gathering, export, lift and re-injection of natural gas or carbon dioxide (CO2) to meet regulatory requirements or for oil field enhanced recovery in the upstream market; gas processing, main refrigeration compression and a variety of other! duties required in the production of liquefied natural gas (LNG); gas processing duties, storage and pipeline transmission compression for the midstream market; synthetic fuels; and steam turbine power generation for floating production, storage and offloading (FPSO) vessels as well as power generation or mechanical drive duties for a variety of compression and pumping applications in the oil and gas market. It is also a supplier of diesel and gas engines that provides customized energy solutions across worldwide energy infrastructure markets based upon reciprocating engine power systems technologies.

The Company's custom-engineered products are also used in other advanced applications in the environmental markets it serves. These applications use renewable energy sources, reduce carbon footprint, recover energy and/or energy efficiency. These products include, among others, compression technologies for carbon capture and sequestration (CCS); hot gas turbo-expanders for energy recovery in refineries and certain chemical facilities; co- and tri-generation combined heat and power (CHP) packages for institutional and other clients; and a number of steam turbine applications to generate power using steam produced by recovering exhaust heat from the main engines in ships, recovering heat from mining and metals production facilities and exhaust heat recovery from gas turbines in on-shore and off-shore sites.

It provides an array of products and services to its worldwide client base in over 150 countries from its global locations in 18 United States and 32 countries (over 76 sales offices, 49 service and support centers, including six engineering and research and development centers, and 13 manufacturing locations). Its clients include, among others, BP, Chevron, ConocoPhillips, Dow Chemical Company, ExxonMobil, Gazprom, LUKOIL, Marathon Petroleum Company, PDVSA, Pemex, Petrobras, PetroChina, Petronas, Repsol, Royal Dutch Shell, SBM, Saudi Aramco, Statoil, Total and Turkmengaz.

!

New Units

The Company is a manufacturer of engineered turbo and reciprocating compression equipment and steam turbines. It is also a manufacture power turbines; special-purpose gas turbines; hot gas expanders; gas and diesel engines; trip, trip throttle and non-return valves; magnetic bearings and control systems. Its new unit products are built to client specifications for long-life, critical applications. It is a supplier of turbo machinery for the energy infrastructure markets worldwide. Applications for its turbo products include gas gathering, lift, export and injection; CO2 compression for enhanced oil recovery; storage and transmission; synthetic fuels; ethylene and fertilizer production; refineries and chemical production; CCS and CAES. In addition, it offers a variety of gas and power turbines covering a power range from approximately 1.5 megawatts to more than 50 MW, which support driver needs for various centrifugal compressor product lines, as well as for power generation applications. It also offers control systems for its centrifugal compressors.

It is a supplier of reciprocating compressors, offering products ranging from medium to high-speed separable units driven by engines or electric motors, to slow speed motor driven process reciprocating compressors. It is a supplier of standard and engineered mechanical drive steam turbines and turbine generator sets. Its steam turbine models cover a power range from a few kilowatts up to 75MW, are available for high inlet steam pressure and temperature conditions, with or without induction and/or extraction sections and in condensing or back-pressure designs. These units are used primarily to drive pumps, fans, blowers, generators and compressors. It is a supplier of diesel, gas and dual fuel internal combustion reciprocating engines. Its Guascor engines cover a power range of up to 1.5 megawatts. Guascor engines are used in 1) industrial applications and power generation, 2) marine propulsion and auxiliary genera! tion, and! 3) environmental solutions, CHP and bioenergy (waste water treatment plant, landfill and biogas generation).

Aftermarket Parts and Services

Aftermarket parts and services segment provides them with long-term growth opportunities. Aftermarket parts and services are generally less sensitive to business cycles than the new units segment, although revenues and bookings tend to be higher in the second half of the year. With a typical operating life of 30 years or more, rotating equipment requires substantial aftermarket parts and services over its operating life. Parts and services activities realize higher margins than new unit sales. Additionally, the cumulative revenues from these aftermarket activities often exceed the initial purchase price of the unit. Its aftermarket parts and services business offers a range of services designed to enable clients to maximize their return on assets by optimizing the performance of their mission-critical rotating equipment. It offers a broad range of aftermarket parts and services, including: replacement parts, field service turnaround, service and repair, operation and maintenance contracts, rotor / spare parts storage, condition monitoring, controls retrofit, site / reliability audits, remote area energy solutions, equipment repair and rerates, equipment installation, applied technology, long-term service agreements, special coatings / weldings, product training, turnkey installation / project management and energy asset management.

The Company competes with GE Oil & Gas, Solar Turbines, Inc., MAN Diesel & Turbo, Siemens, Rolls-Royce Energy, Elliott Company, Mitsubishi Heavy Industries, Burckhardt Compression, Neuman & Esser Group, Ariel Corp., Howden Thomassen Compressors BV and Mitsui & Co., Ltd, Elliott Company, Shin Nippon Machinery Co. Ltd, GE/Jenbacher, Caterpillar and Cummins.

Advisors' Opinion:
  • [By Rich Smith]

    Houston-based Dresser-Rand Group (NYSE: DRC  ) has settled on a replacement for departing CFO Mark Baldwin. The company announced Wednesday that effective May 1, Jan Kees van Gaalen will fill the role.

Best Oil Stocks To Invest In 2014: Delek US Holdings Inc. (DK)

Delek US Holdings, Inc. operates as an integrated downstream energy company that operates in petroleum refining, logistics, and convenience store retailing businesses. The company operates in three segments: Refining, Logistics, and Retail. The Refining segment owns and operates two refineries in Tyler, Texas, and El Dorado, Arkansas; and produces various petroleum-based products used in transportation and industrial markets. The Logistics segment gathers, transports, and stores crude oil, as well as markets, distributes, transports, and stores refined products. It also offers crude oil transportation services for terminalling and marketing services; and markets light products using third-party terminals. This segment owns approximately 400 miles of crude oil transportation pipelines, 123 miles of refined product pipelines, 600-mile crude oil gathering system, and associated crude oil storage tanks with an aggregate of approximately 2.6 million barrels of active shell capa city. The Logistics segment serves oil companies, independent refiners and marketers, jobbers, distributors, utility and transportation companies, and independent retail fuel operators. The Retail segment markets gasoline, diesel, and other refined petroleum products, as well as convenience merchandise. As of May 8, 2013, this segment operated 373 retail fuel and convenience stores under the MAPCO Express, MAPCO Mart, Discount Food Mart, Fast Food and Fuel, East Coast, Delta Express, and Favorite Markets brands. The company was founded in 2001 and is headquartered in Brentwood, Tennessee. Delek US Holdings, Inc. is a subsidiary of Delek Petroleum Ltd.

Advisors' Opinion:
  • [By Ben Levisohn]

    That said we are recommending a slight tactical shift toward more defensive posturing with a focus on lower beta names and companies that screen at a discount from a valuation perspective. As a result, we are
    downgrading [Delek US Holdings (DK)] and [Tesoro (TSO)] to Sector Perform and upgrading [Phillips 66] and [PBF Energy] to Sector Outperform.

  • [By Dan Dzombak]

    Second among oil and gas stocks today was Delek U.S. Holdings (NYSE: DK  ) up 4.78%, to $37.28. During the refiners' drop on Tuesday and Wednesday, Delek dropped 9.88%. Despite the comeback today, the stock is still down 5.6% from where it was before the plunge. The company owns two refineries in Texas, terminals throughout Texas, Arkansas, and Tennessee, and retail stores throughout Tennessee, Alabama, and Georgia.

No comments:

Post a Comment